|
|
|
Who manufactures the GoPay Terminal Kits? |
| GoPay Terminal Kits are manuractrued by Bennett Pump Company. The kit includes
a Debit/Credit payment terminal manuractured by VeriFone that has been industrialized
by Bennett for outdoor applications. The kit also includes proprietary Bennett
designed interface boards, power supplies, and related hardware. |
What's included in the kit? |
Each kit includes the necessary parts to add pay-at-the-pump for both sides of a dispenser:
- 2 GoPay Customer Terminals configured for Debit/Credit or Credit only depending on the needs of the customer.
- 1 Mounting bracket that holds 1 Power Supply on one side and 1 VIB interface board on the other side.
- 2 Thermal Reciept Printers with Tear Bar Reciept Delivery
- 1 set of Cables and miscellaneous hardware
- 1 Set of Dispenser Mounting hardware (the dispenser mounting hardware varies by pump brand and model)
- Set of instructions
|
What else will be required to install the GoPay Terminals? |
- An interconnection box mounted inside the store is required.
- Master-Session Debit I/C Box (handles up to 16 fueling positions)
- DUKPT Debit I/C Box (handles up to 16 fueling positions)
- Credit Only I/C Box (handles up to 16 fueling positions)
- For each dual sided dispenser, a set of wires must be pulled from the dispenser to
the I/C Box. The wire set handles both sides of a dispenser and consists of: one
twisted wire pair for data plus one DC ground wire. The twisted wire pair are data+ and
data-, 18AWG or larger, gas and oil resistant stranded wire, 8 twists per foot. The
data wire circuit is a Class 1 circuit. Refrence NEC 725 for wiring requirements.
The data wire pair and ground wire can be run in the same conduit as pump power if desired.
- VeriFone Ruby Point of Sale and latest software.
- VeriFone Cables from Ruby to I/C Box.
- A Pump Controller to allow the Verifone Ruby to communicated to the fuel protocol of
fuel protocol of the dispenser. Note: Communications between the Ruby and the GoPay
Terminal do not go through the pump controller.
- Set of instructions
|
How can I order the GoPay Terminals? |
| You can purchase the GoPay terminals directly from our web site, or use our contact form to place an order.
We will have to contact you by telephone to finalize the order, so be sure to include a phone# where you can be reached. |
We will also need the following information about your store, so be sure to include it in the Order Options(when purchasing from our online store),
or in the 'Question or Comments' Box on our contact form.
- The brand of fuel that you will be selling.
- The brand and model numbers of the dispensers at your location.
- Are you already using the VeriFone Ruby P.O.S. and if so, which software version you are using?
|
Does the GoPay Termnal Kit fit every pump brand and model? |
| No. While the basic components are the same in every kit, the mounting hardware
and methods may be different to accomodate the pyhsical space available in the electronic
head of each type of dispenser. Some dispensers require holes to be cut in the face
plate of the electronic door. Others may require replacement of the plates in the door
panels of the electronichead(replacement plates are supplied with the kit). Still
others simply may not have the physical space nedessary to mount the components in
and on the elecrtonic door face and may require the addition of a GoPay Terminal
Housing Box mounted on top of the electronic head. Please refer to our
Availability Chart to see if your pump brand and system type. |
|
|
|
