TCS 700 Positive Displacement Rotary Meters

DESIGN
The 700 series rotary flow meter has a simple and efficient meter design consisting of a housing and three rotors that rotate in unison within the measuring chamber. The absence of wear, from no metal-to-metal contact inside the chamber, eliminates any deterioration in accuracy and provides a long service life. The rotors are supported by bearings inserted into two bearing plates, where at the end of each rotor shaft is a timing gear. The timed rotation between each rotor is then transferred through the calibration adjuster to the register, which will then give a consistent and superior measurement of accuracy.
FEATURES

• No metal-to-metal contact within the measuring chamber
• Low Pressure Drop
• Low Maintenance
• Long Service Life
• Light and Compact Design
• Bi-directional Flow Direction
• Wide Viscosity Range - up to 1,500,00 SSU (325,000 CPS)
• Meets NIST, OIML, ATEX, NMI, S.WA, SABS and many other international weights & measures

SPECIFICATIONS
Design: Three (3) Rotors
Meter Types: SP, SPA, SPD, IC, IP, AF, SS & SSD
Linear Accuracy:

• 5:1 Turndown - capable of ± 0.100% of maximum nominal flow rate
• 10:1 Turndown - capable of ± 0.125% of maximum nominal flow rate 15:1 Turndown - capable of ± 0.150% of maximum nominal flow rate Repeatability: 0.05% over
• 15:1 turndown- capable of ± 0.150% of maximum nominal flow rate Repeatability: 0.05% over 15:1 turndown.

Pressure: 150 PSI (10.5 BAR)
350 PSI (25 BAR)(700-20 LP METER TYPE ONLY)
Temperature: - 40 to 160°F (- 40 to 71°C)
Material: Aluminum, Ductile Iron or Stainless Steel
Seals: EPDM, FKM, PTFE, Simriz® or UL Buna

METER TYPES

• SP Standard Petroleum - Gasoline, Fuel Oils, Diesel, Bio-Diesel, Kerosene, Jet Fuels, Vegetable oils, Motor Oils, Ethylene Glycol, Naptha etc.
  
• SPA Standard Petroleum - Aviation Aviation Gasoline, Gasoline, Jet Fuels, Fuel Oils, Diesel, Bio-Diesel, Kerosene, Naptha, etc.
  
• SPD Standard Petroleum - Ductile (Nodular) Iron Ethanol, Methanol, Aviation Gasoline, Gasoline, Diesel, Bio-Diesel, Fuel Oils, Kerosene, Vegetable Oils, Motor Oils, Naptha, etc.
  
• IC Industrial Products (Carbon Bearings) Industrial Chemicals, General Solvents, Water, Alcohols, Acetones, MEK, Toluene, etc.
  
• IP Industrial Products (SS Bearings) Industrial Chemicals, General Solvents, Liquid Sugars, Corn Syrup, Soybean Oil, Shortenings, Latex Products, Adhesives, etc.
  
• AF All Ferrous - Industrial Chemicals, Solvents, Pesticides, Nitrogen Solutions, Fertilizer, Chlorinated Solvents, Paints, Inks, Alcohols, Adhesives, Molasses, Corn Syrup, etc.
  
• SS Stainless Steel - Industrial Chemicals, Solvents, Nitric Acid, Phosphorus Acid, Glacial Acetic Acid, Anti-Icing Fluid, Vinegar, Fruit Juices, etc.
  
• SS Stainless Steel - Diesel Exhaust Fluid - AdBlue, ARLA, AUS32 and Diesel Exhaust Fluid (DEF)

---

Updated 11/11/24